Maintenance measures for corn processing equipment in autumn and winter

　　Corn processing machinery is a kind of equipment used in corn processing. It is mainly used in food processing plants and occupies an important position in the production of modern food enterprises. We know that for mechanical equipment, if you want it to last a long time, you must do daily maintenance work. If the temperature is good in summer, the operation of mechanical equipment will not be affected. However, in the cold winter, due to the low temperature, if you can preheat the equipment before use, it is also a good way to protect the machinery. Let’s learn about it together.

　　1. Cleaning and lubrication: Clean the outer surface and internal parts of the equipment regularly to remove dust and debris. Check the lubrication system of the equipment to ensure sufficient lubricating oil, and replace the lubricating oil if necessary to maintain the normal operation of all parts of the equipment.

　　2. Check the electrical system: Check the electrical system of the equipment, including wires, switches, sockets, etc., to ensure that the electrical connections are firm and there are no damaged or aging parts. If problems are found, repair or replace them promptly.

　　3. Regular maintenance of transmission components: Corn processing equipment usually involves transmission components, such as belts, chains, gears, etc. Check whether these parts are tight, adequately lubricated, and whether they are worn or cracked. Replace damaged parts if necessary.

　　4. Anti-rust treatment: In autumn and winter, equipment is susceptible to moisture and corrosion. Therefore, it is necessary to regularly check the surface coating of the equipment and carry out anti-rust treatment in time to ensure that the surface of the equipment is smooth and corrosion-resistant.

　　5. Check safety devices: Ensure that the safety devices of the equipment, such as emergency stop buttons, safety shields, etc., are in good working condition. These safety devices protect operators during emergencies.

　　6. Regular calibration of equipment: Certain corn processing equipment may require regular calibration to ensure its working accuracy and efficiency. Develop a calibration schedule based on equipment usage and perform calibration when necessary.

　　7. Storage equipment: If the equipment is not used in autumn and winter or needs to be stored for a long time, appropriate storage measures should be taken, such as covering with dust covers, avoiding direct sunlight, maintaining ventilation, etc., to prevent the equipment from being damaged or corroded.

　　In addition, for the use of corn processing machinery, if it is done indoors in winter, appropriate temperature can increase work efficiency. For air volume adjustment, the air volume control valve is usually opened to the specified position. If the air volume is too small, materials will easily settle in the air duct under the host. In addition, clean dust and debris in time to avoid reacting with the equipment, causing corrosion of components and reducing service life.